Transnet Extra MPD is a powerful yet versatile non caustic multi purpose detergent that can be used for most vehicle cleaning tasks including interior cleaning, exterior traffic film removal, engine and chassis cleaning and garage floor cleaning. It contains a special blend of high quality biodegradable surfactants, detergents and sequestrants which provide a superior cleaning action at lower temperatures. Transnet Extra MPD contains corrosion inhibitors and is free from caustic, phosphates, acids, solvents and butyl ingredients.
Approved to 4 Rail Services document No.R17702, product formerly known as Applied Chemicals 4905 – Hard Surface Cleaning.
Approved to 4 Rail Services document No.R16971, product formerly known as Applied Chemicals 4905 – Rolling Stock Cleaning.
Transnet Extra MPD can be used for cost effective cleaning and removal of a variety of soils including road film, oil, grease from bus floors, tiles, garage and workshop floors, fabric and vinyl seating and general purpose cleaning at the recommended dilutions. The product can be used either hot or cold, through a variety or equipment including spray arches, hot or cold, high or low pressure equipment.
DIRECTIONS FOR USE
Dilution should be set according to the task to be undertaken. Accurate dilution can be supplied using pre-set dispensing stations.
Light soiling or bus and truck interiors 1 part Transnet Extra MPD to 50 parts water. Apply by spray, brush or swab and then rinse with clean water.
Heavy soiling of hard surfaces within the interiors of buses use from 1 part Transnet Extra MPD to 9 parts water. Always check for compatibility if the chemical resistant of the substrate is unknown.
Heavy soiling of engines, chassis etc., dilute 1 part Transnet Extra MPD to 15 parts water and apply by hot or cold pressure washer or foam application systems. Rinse with water.
Workshop and garage floors etc., with normal soiling:- dilute 1 part Transnet Extra MPD with 25 parts water and apply by spray, can or floor scrubbing equipment.
Light soiling on exterior paintwork:- dilute 1 part Transnet Extra MPD with 50 parts water and apply by spray, foam or brush. Avoid application to very hot paintwork or in direct sunlight. Do not allow the product to dry on paintwork. Always rinse thoroughly.
Appearance - Clear straw liquid
Odour - Lemon
Solubility - Completely soluble in water
Flammability None flammable
pH of concentrate 12.5
pH of working solutions 11.0
Recommended storage & handling materials - Steel or polythene tanks and fittings
|Approx. Height (mm)||280|
|Approx. Width (mm)||180|
|Approx. Depth (mm)||130|
|Approx. Length (m)||-|
|Country of Manufacture|
|Data Sheet||View Data Sheet|