A powerful yet versatile non caustic multi-purpose detergent. It can be used for most cleaning tasks including interior cleaning and exterior traffic film removal, engine and chassis cleaning and even garage floors. It contains a special blend of high quality biodegradable surfactants, detergents and sequestrants which provide a superior cleaning action at lower temperatures. An ideal TFR, cleaner and degreaser for when cost restraints dictate a single product solution.
Dilution should be set according to the task to be undertaken. Accurate dilution can be supplied using pre-set dispensing stations. Light soiling or bus and truck interiors 1 part to 50 parts water. Apply by spray, brush or swab and then rinse with clean water. Heavy soiling of hard surfaces within the interiors of buses use from 1 part to 9 parts water. Always check for compatibility if the chemical resistant of the substrate is unknown. Heavy soiling of engines, chassis etc., dilute 1 part to 15 parts water and apply by hot or cold pressure washer or foam application systems. Rinse with water. Workshop and garage floors etc., with normal soiling:- dilute 1 part with 25 parts water and apply by spray, can or floor scrubbing equipment. Light soiling on exterior paintwork:- dilute 1 part with 50 parts water and apply by spray, foam or brush. Avoid application to very hot paintwork or in direct sunlight. Do not allow the product to dry on paintwork. Always rinse thoroughly.
Recommended Dilutions Manual : 1:3 - 1:20 parts with water Steam Cleaning: 1:20 - 1:100 with parts with water Dip tanks: Use neat or diluted in up to 10 parts water
Approved to 4 Rail Services document No.R17702, product formerly known as Applied Chemicals 4905 – Hard Surface Cleaning.
Approved to 4 Rail Services document No.R16971, product formerly known as Applied Chemicals 4905 – Rolling Stock Cleaning.
|Approx. Height (mm)|
|Approx. Width (mm)|
|Approx. Depth (mm)|
|Approx. Length (m)||-|
|Country of Manufacture|
|Data Sheet||View Data Sheet|